Modular Kitchen Sink Accessories CSX96

Set of accessories for kitchen sink

Treat your kitchen sink to this simple and practical set of accessories that will help you keep it clean and organized (detergent pump not included).

The two soap dishes come with dry racks, which allow the contents to stay dry.

The mini garbage can comes with a collar that holds a small trash bag (the size of an average vegetable bag used at supermarkets), and with a lid to hide its contents and control odors. The same container can also serve as a tool caddy, in which case rather than the lid and its handle you can print an extra dry rack to fit into its bottom.

This is a set of components from the Infinite Containers 96 Series, where you will find additional sizes, shapes, and accessories. You can download this set, or make your own set by choosing different-sized containers and accessories from our Infinite Containers collections.

Small square soap dish:
Dimensions: 106 x 106 x 29 mm
Container: CS96-25
Dry rack: ARR96-10

Large rectangular soap dish and sponge holder:
Dimensions: 212 x 106 x 29 mm
Container: CX96-25
Dry rack: ARX96-10

Mini garbage can
Dimensions: 110 x 110 x 117 mm
Container: CS96-110
Wastebin collar: ATC96-26
Round lid: LR96-O-TS
Lid handle: FPN128-74TS from the Infinite Containers 128 Series (all finials from the 128 series also fit all lids from the 96 series)

If the dry rack sticks to the bottom of the soap dish due to dripping soap, do not force it to remove it, simply run warm water into the container until it loosens the rack.

WARNING: This stuff can be addictive. Please print responsibly: always print as many as you need, but never more than you need.

Objects in the photographs were printed on a standard desktop 3D printer, without secondary operations.

About Infinite Containers

Infinite Containers is a collection of modular, stackable containers, lids, stands, extensions, and accessories. It includes hundreds of components of different sizes and shapes, that combine in virtually infinite assemblies to fit your functional daily needs.

Look through our collections for additional examples and ideas on how to use our Infinite Containers.

TIP: The series number (which matches the first three digits of the item code) refers to the diameter of the internal cavity. All components from the same series/diameter fit together, stack or rotate on top of each other. Containers from different series are larger or smaller in inner diameter but still designed to coordinate. The second number in the item’s code (after the dash) refers to the height of the container (not including the 4mm nesting base).

For more information about Printable Objects and our designs please visit
printableobjects.com

Required Build Volume: 212 x 110 x 114 mm

Nozzle: 0.4
Layer: 0.2
Infill: 15% (30% for the threaded finial)
Supports: From platform only
Scalable: YES
Material: Tested with PLA and ABS

NOTE:
- The threaded finial locks into the lid, make sure you screw it in until you feel it lock.
- To easily remove the support from the finial: hold the supports firmly and unscrew the finial.

If you have any questions, please feel free to ask in the comments, or via email.