Ironing calibration: speed and flow rate, 15-70mm/s and 10-50%
Remixed by
Copyright Claim
Ironing calibration: speed and flow rate, 15-70mm/s and 10-50%
Remixed by
Boost
8
48
18
Print Profile(1)
0.2mm layer, 1 walls, 15% infill
Designer
2.3 h
2 plates
Boost
8
48
18
1
103
107
Released
Description
Ironing test for ironing speeds from 15 to 70mm/s and flow from 10 to 50%
Comment & Rating (18)
All
Print Profile
0.2mm layer, 1 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 1 walls, 15% infill
Real easy calibration
0
Reply
Print Profile
0.2mm layer, 1 walls, 15% infill
Perfect model for the use case. I identified the settings I need and now know how to print with Ironing.
(Edited)0
Reply
Print Profile
0.2mm layer, 1 walls, 15% infill
this is a solid test. but not necessarily the final answer when it comes to large scale ironing. it will however get you in the ballpark. thanks
0
Reply
Print Profile
0.2mm layer, 1 walls, 15% infill
Printed Great.
(Edited)0
Reply
Print Profile
0.2mm layer, 1 walls, 15% infill
Great resource
0
Reply
Print Profile
0.2mm layer, 1 walls, 15% infill
Very helpful to use. Having the steps in 5% increments might be a little overkill though. Same for the 5mm/s steps.
0
Reply
Print Profile
0.2mm layer, 1 walls, 15% infill
Great tool. Printed just the one I wanted from Bambu app
0
Reply
Print Profile
0.2mm layer, 1 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 1 walls, 15% infill
0
Reply
This remix is based on
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld