Scalable Cable Raceway

A cable raceway that can be scaled and only requires about 2 grams of filament, making it an excellent end-of-spool print. 

It does not require you to have access to the channel opening of the extrusion and can instead be popped into place due to the open ended attachment point. If the raceway is no longer wanted on that piece, just simply pop it off. No cutting necessary. 

Inland Filament Used: 

• Green PLA+ 
• Gray PLA+
• Inland PLA+ on Amazon

Printer Settings:

• 210C Nozzle 
• 60C Bed
• 2 Walls
• There is no infill or top/bottoms
• Recommended to print on a 3 layer raft

Designed by aurancio