Simple Argyle Pattern Coaster - 4 Colors

The coaster is 100mm in diameter and 2.8mm tall. I have the pattern side down, but you can rotate them if you want. I have the filament set to generic PLA.

If you download the .stl model files, make sure you check 'detect thin walls' in the strength tab

The thin lines are .4mm wide, so if you scale the model in x/y directions, those lines might not print.

Filament used:

Overture Digital Blue PLA+ (Bright Blue)

Overture Morning Blue PLA+ (Light Blue)

Inland Blue PLA+ (Dark Blue)

Inland White PLA+