Heart shaped Tetris puzzle with a stand

If you love puzzles, this one is definitely for you - a heart shaped stand puzzle made from classic tetris pieces. Connected with plugs, this will be a challenge for you to put it together. A video tutorial is in the making to help the ones who just want to put it together without too much trouble.

Model dimensions when it is put together is 7.87 inches (20 cm) Height | Base size is 5.31 inches (13.5 cm) * 2.95 inches (7.5 cm)

To complete the puzzle you will need the following amounts of each shape:

1x Base shape
5x “4 by 1” shape
30x “S” shape
30x “T” shape
42x “L” shape
15x “Square” shape
150+ connector pieces (depends on how sturdy you want the final piece, but I would recommend at least 150 connector pieces

There are couple of ways how to put it together, but for some guidance here’s the shapes by layers starting from the bottom:

Bottom layer - 3x3 shape: Second layer 3x5 shape:

| _ _ _ | | _ _ _ |
| _ _ _ | | _ _ _ |
| _ _ _ | | _ _ _ |
| _ _ _ |
| _ _ _ |

Third layer 5x7 shape: Forth layer 5x9 shape:

| _ _ _ _ _ | | _ _ _ _ _ |
| _ _ _ _ _ | | _ _ _ _ _ |
| _ _ _ _ _ | | _ _ _ _ _ |
| _ _ _ _ _ | | _ _ _ _ _ |
| _ _ _ _ _ | | _ _ _ _ _ |
| _ _ _ _ _ | | _ _ _ _ _ |
| _ _ _ _ _ | | _ _ _ _ _ |
| _ _ _ _ _ |
| _ _ _ _ _ |

Fifth AND sixth layer - 7x11 shape Seventh layer - 7x13 shape

| _ _ _ _ _ _ _ | | _ _ _ _ _ _ _ |
| _ _ _ _ _ _ _ | | _ _ _ _ _ _ _ |
| _ _ _ _ _ _ _ | | _ _ _ _ _ _ _ |
| _ _ _ _ _ _ _ | | _ _ _ _ _ _ _ |
| _ _ _ _ _ _ _ | | _ _ _ _ _ _ _ |
| _ _ _ _ _ _ _ | | _ _ _ _ _ _ _ |
| _ _ _ _ _ _ _ | | _ _ _ _ _ _ _ |
| _ _ _ _ _ _ _ | | _ _ _ _ _ _ _ |
| _ _ _ _ _ _ _ | | _ _ _ _ _ _ _ |
| _ _ _ _ _ _ _ | | _ _ _ _ _ _ _ |
| _ _ _ _ _ _ _ | | _ _ _ _ _ _ _ |
| _ _ _ _ _ _ _ |
| _ _ _ _ _ _ _ |

Eight Layer - 5x13 shape WITH A HOLE in the middle:

| _ _ _ _ _ |
| _ _ _ _ _ |
| _ _ _ _ _ |
| _ _ _ _ _ |
| _ _ _ _ _ |
| _ _ _ _ _ |
| _ ||_ _ |
| _ _ _ _ _ |
| _ _ _ _ _ |
| _ _ _ _ _ |
| _ _ _ _ _ |
| _ _ _ _ _ |
| _ _ _ _ _ |

Ninth layer - 2x 5x5 squares with 5x1 hole in the middle:

| _ _ _ _ _ |
| _ _ _ _ _ |
| _ _ _ _ _ |
| _ _ _ _ _ |
| _ _ _ _ _ |

| _ _ _ _ _ |
| _ _ _ _ _ |
| _ _ _ _ _ |
| _ _ _ _ _ |
| _ _ _ _ _ |

Tenth layer 2x 3x4 rectangles with 3x4 hole in the middle

| _ _ _ |
| _ _ _ |
| _ _ _ |
| _ _ _ |

| _ _ _ |
| _ _ _ |
| _ _ _ |
| _ _ _ |

11th layer 2x 1x2 rectangles with 5 spaces in between

_
| _ |
| _ |

_
| _ |
| _ |

Front view of the shape:

    _ _                  _ _                                                    _
 _| _ _|_           _|_ _ |_     - 11th layer                _| _ |_
| _ _ _ _|_    _|_ _ _ _ |    - 10th layer             _|_ _ _ |_

| _ _ _ _ _||_ _ _ _ _ |_ - 9th layer | _ _ _ _ |
| _ _ _ _ _ _ _ _ _ _ _ _ _ | - 8th layer _| _ _ _ _ _|
| _ _ _ _ _ _ _ _ _ _ _ _ _ | - 7th layer | _ _ _ _ _ _ |
| _ _ _ _ _ _ _ _ _ _ _| - 6th layer | _ _ _ _ _ _ _|
| _ _ _ _ _ _ _ _ _ _ _| - 5th layer | _ _ _ _ _ _ _|
| _ _ _ _ _ _ _ | - 4th layer | _ _ _ _ _|
| _ _ _ _ _ | - 3rd layer | _ _ _ _ _|
| _ _ _ | - 2nd layer | _ |
| _ | - 1st layer | _ _|

Link to a guide: https://docs.google.com/document/d/14GGmrzMhk6GGGp0XhPeOYhAlY4t4Q-PKC1d8ZQdACic/edit

Actual guide of step by step and a video guide in progress, will notify once published

”Base” shape 1x

Layer height: 0.2 mm
Infill type: Gyroid
Infill percentage: 12%
Print speed: 250 mm/s
Print time: 1 hours and 50 Minutes
Amount of material required: ~ 18 m

”S” shape 30x

Layer height: 0.2 mm
Infill type: Gyroid
Infill percentage: 12%
Print speed: 250 mm/s
Print time: 3 hours and 40 Minutes
Amount of material required: ~ 20 m

”Square” shape 15x

Layer height: 0.2 mm
Infill type: Gyroid
Infill percentage: 12%
Print speed: 250 mm/s
Print time: 1 hours and 50 Minutes
Amount of material required: ~ 11 m

”T” shape 30x

Layer height: 0.2 mm
Infill type: Gyroid
Infill percentage: 12%
Print speed: 250 mm/s
Print time: 3 hours and 45 Minutes
Amount of material required: ~ 20 m

”L” shape 42x

Layer height: 0.2 mm
Infill type: Gyroid
Infill percentage: 12%
Print speed: 250 mm/s
Print time: 5 hours
Amount of material required: ~ 27 m

”4 by 1” shape 5x

Layer height: 0.2 mm
Infill type: Gyroid
Infill percentage: 12%
Print speed: 250 mm/s
Print time: 45 Minutes
Amount of material required: ~ 3.5 m

Connector pieces 200x

Layer height: 0.2 mm
Infill type: Gyroid
Infill percentage: 12%
Print speed: 250 mm/s
Print time: 4 hours and 10 Minutes
Amount of material required: ~ 21 m