This is a simple holder to hold a 60m reel of wire on an Ikea Skadis peg board and allow it to rotate and function whilst fitted there.

It will take any reel which is 81.5mm diameter x 64mm deep (or smaller), with a hole of at least 22mm.

I'm using it with two reels of Tuofeng 60m 22AWG wire.

I hope you enjoy printing and using my design. To help me keep designing and uploading more things, you can tip me via 'Buy Me a Coffee' here: https://www.buymeacoffee.com/JoshForwood

If you're after other Skadis mounts, I've made a collection of my Ikea SKÅDIS designs here.