original print profile

https://www.thingiverse.com/thing:2999151

Taking advantage of the exit of ant-man and wasp movie, I will upload this design of one of the objects that I have made of Marvel.

These are the pym disks of Ant-Man.

The Pym Particles Discs are a complementary weapons technology for the Ant-Man Suit, created by Hank Pym, the first Ant-Man, for his successor Scott Lang. They are stored in a special compartment on the Ant-Man Suit's belt.

Red Discs - The target shrinks to the size of an insect; Contains a unique form of Pym Particles similar to those that power the Ant-Man Suit, supplying sparse mass for stabilization.

Blue Discs - The target grows to the size of a giant; Contains a unique form of Pym Particles different from those that power the Ant-Man Suit, supplying extra mass for stabilization. After plunging into the Quantum Realm, Scott Lang was able to reverse the effect by inserting a Blue Disc into the Suit's regulator and releasing the enlarging Pym Particles directly into the suit.

Post processing:
If you print the file that say pym disk half, you will have to print the file two times, one of those you must mirror the object(if you don't do it the two halves won't fit). Once you have printed the two halfs you have to glue them thogether.

After printing them i do what i usually do to finish my prints. Sand the model, then give to it two coats of primer and sand again. After finishing to leave it smooth, i started painting the model. To paint the model i used davinci fet brushes and acrylic paint.