NOT MY DESING, ORIGINAL ONE OUT OF TITANIUM HERE: https://bigidesign.co/products/ti-pry-bar

PryBar i modeled in Fusion360, have fun with it and please tell me how it worked for you. Still learning how to modle so any feedback is helpfull. I printed in PLA with 80% triangle infill.

You need:

• The 3d printed part
• hot glue
• Some 2-3mm thick magnets (the thinner the better) with a diameter of 5-6mm
• Optionally (i would suggest) a little metal plate to put in the fidget slider (seen in the pictures) to prevent magnets from sticking to hard