Death Star
it's a very simple print that can be print-in-place, it's 4 colors including the Death Star (I used 5 colors but you can also do with 4).
if you use my 3mf file everything is indicated there and it is easy to print, if you decide not to use my file follow the instructions below
Instructions:
Swap Instructions for the hueforge base:
- Start with Black
- At layer #12 (1.12mm) swap to Blue
- At layer #17 (1.52mm) swap to Purple
- At layer #21 (1.84) swap to Withe (or Silver) up to the layer 2.48
- then change color for your Death Star
If re-scaling model make sure not to alter the Z height of the model