Middle Finger Saber collapsible/telescoping middle finger by Joe Wilson

Joe Wilson

Props & Cosplays>Other Props & Cosplays

GIF

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

*** SINGLE COLOUR print by object 1 HOUR 16 mins *** 0.28mm layer, 2 walls, 5% infill

Designer

1.4 h

1 plate

3.6(43)

*** MULTICOLOUR print by object 1 HOUR 18 MINS *** 0.28mm layer, 2 walls, 5% infill

Designer

1.4 h

1 plate

2.9(42)

Boost

278

412

923

795

Released

Description

This is a Middle finger saber, it telecsopes out with a middle finger on the end

this is printed in 2 pieces, the middle finger as one piece and the telescopign part as the other

the middle finger screws on with a thread

Comment & Rating (97)

@h1ckman

saber printed fine, how do i get it to come out? printing hand now. 4 of 4 hands have failed half way through. need stronger supports. screw holes too tight. broke off in saber when screwing in. still can't open any of the 4 sabers.

(Edited)

@h1ckman

printed at 150% same issue with saber. looks like the seams being lined up causes a solid wall down the length of the saber. trying with random seams....random seams didn't help. tried printing expandable side up, same issue, saber is fused shut. tried on A1 & P1s. I am going to redownload the print to see if I made a change that effected it.

@user_1535520402

Replying to @h1ckman :

Had two hands failed also.

@ImaginationF

Print Profile

*** MULTICOLOUR print by object 1 HOUR 18 MINS *** 0.28mm layer, 2 walls, 5% infill

worked out great. I ended up using tree supports instead of regular.

@user_2074641484

No funciona el archivo

@h1ckman

Print Profile

*** MULTICOLOUR print by object 1 HOUR 18 MINS *** 0.28mm layer, 2 walls, 5% infill

got it to work and print at 250%. threads busted off but I epoxyed together.

@user_2087069018

Print Profile

*** MULTICOLOUR print by object 1 HOUR 18 MINS *** 0.28mm layer, 2 walls, 5% infill

(Edited)

Support Issue

Strength Issue:Very weak print. It broke just by screwing in the hand

@Infuse3Daus

Print Profile

*** SINGLE COLOUR print by object 1 HOUR 16 mins *** 0.28mm layer, 2 walls, 5% infill

@Infuse3Daus

Print Profile

*** MULTICOLOUR print by object 1 HOUR 18 MINS *** 0.28mm layer, 2 walls, 5% infill

@ok2vvv

Print Profile

*** MULTICOLOUR print by object 1 HOUR 18 MINS *** 0.28mm layer, 2 walls, 5% infill

Support Issue:Hand printing is very complicated. The whole is stored on supports and has come loose several times. I had to print multiple times. The handle came out quite well, but the two parts cannot be pulled out.