My best flying ultralight indoor glider yet.
It came at 3.4 grams in PETG.
It's an easy and quick print, in PLA or PETG.
If you're going for PLA, I recommend the smooth PEI plate for best adhesion.
You do need a printer capable of doing nice first layers.
Removing the print from the plate is where you need to be carefull and take your time. As shown in the photo, I recommend using a credit card like card. It is important that you orient your card's edge perpendicular to the infill's lines to avoid separating those lines.
Out of the printer, your glider should be nicely balanced and fly well. However, you can ajust the elevator if needed.
Please rate, it's beneficial to everyone.
Happy printing😋
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.