Super Slim Bambu Printer Plate storage P1S P1P etc
Copyright Claim
Super Slim Bambu Printer Plate storage P1S P1P etc
Boost
47
125
39
Print Profile(1)
0.2mm layer, 2 walls, 12% infill
Designer
3 h
1 plate
Boost
47
125
39
0
237
108
Released
Description
Bambu Slim Minimalist Buildplate storage
Aligns with 2 notches on the left hand side of the printer and fits neatly against the side of the printer enclosure
the mount has a small recess for some light 3m double sided adhesive if you want to have a firmly fixed attachment but its not essential
Comment & Rating (39)
All
Print Profile
0.2mm layer, 2 walls, 12% infill
Perfect
The designer has replied
1
Reply
thanks for the nice feedback
0
Reply
you happen to have STEP files for me? it does not fit the printer, when you have thicker side panels from sheet material like acrylics or polycarbonate - thx
The designer has replied
1
Reply
i dont but you can add a negative modifier to the model using the bambu slicer to make the locating pegs thinner on the side nearest the plates
0
Reply
Replying to @KENPRINT
no worries, i can work with the STL files aswell, step would just be way more convenient to modifiy
0
Reply
Replying to @suit1337
im away for christmas so unfortunatley cant assist with the stl until im back
0
Reply
Print Profile
0.2mm layer, 2 walls, 12% infill
Probably a little too slim, truth be told, but it printed OK and was good practice for me with my new X1C
The designer has replied
2
Reply
theres a thick version there now also for 5 plates
0
Reply
that must be the one I downloaded this afternoon. Looks good - thanks for your efforts.
0
Reply
Do you know if it could be mirrored to the right hand side? I have a print going, and can't flip it over. My poop chute will block this on the left hand side.
The designer has replied
1
Reply
have it mirrored now - had to swap modify the logo so i could mirror it its in my other models now
1
Reply
Replying to @KENPRINT
Awesome!! Thank you so much!
0
Reply
Replying to @SpaghettiPrinte
no problems let me know if you have any issues
0
Reply
Print Profile
0.2mm layer, 2 walls, 12% infill
came out great and fits the two extra plates I have. haven’t been able to get it to connect under the printer but it stands up on its own so it’s not a big deal
The designer has replied
1
Reply
tilt the printer over slightly and you will find the 2 grooves it needs to alot into 👌🏻
0
Reply
ok, thanks! I tried to do it without tilting and looking but failed lol.
0
Reply
Print Profile
0.2mm layer, 2 walls, 12% infill
Fantastic, sits nice and discreetly next to the printer.
The designer has replied
1
Reply
thanks for the positive feedback
0
Reply
Print Profile
0.2mm layer, 2 walls, 12% infill
Fantastic fit on the x1c both sides.
The designer has replied
1
Reply
excellent thanks
0
Reply
Print Profile
0.2mm layer, 2 walls, 12% infill
prints pretty close to the pre print extrusion. remove this before the job starts.
1
Reply
Print Profile
0.2mm layer, 2 walls, 12% infill
1
Reply
Print Profile
0.2mm layer, 2 walls, 12% infill
1
Reply
License
This work is licensed under a
Creative Commons Attribution-NoDerivativesRelated Models
© 2024 MakerWorld