UPDTATES

V2.2 - 24/04/24:

• Small changes to the top of the main swatch
• Added another 2 additional modules of 40 (20x2) and 80 (20x4)

V2.1 - 02/02/24: Added a vertical perforation in all holes to make use of the sample hole as a lock.
If you are afraid that the sample book may fall because you have not fixed it, you can insert 2 wires of 2.5 mm diameter to the base and it will retain all the samples.

V2 - 25/01/24: Due to the news of the discontinuation of PLA Tough and the doubt as to whether BambuLab will update the pack of 80 filament swatches, I have designed a version 2 with the name part in the form of a complete cover so that, in the future, we can update it by complete. 

You probably already know the original filament samples for this remix.

I considered it necessary to make a vertical display of these 80 swatches, so I used its design to add 2 holes to be able to screw it to the wall

and, also, in case someone wants to use it on a metal surface, 7 holes for 10x3mm magnets.

I have also modified the inclination of the sample holes to prevent them from falling easily.

I have also added a sign at the top

At the bottom I have added 3 slots so that, in the future, we can add mod possibilities for other filaments such as PLA SILK, METAL, translucent PETG, etc.

The position of the labels has also been modified so that they can be read vertically, respecting the relief and printing in two colors.

NOTE: I have not had any adhesion problems when printing any of the parts in PLA, so I have left the raft on automatic. Please if you have any kind of stickiness problem let me know before you start posting one star reviews without any kind of value or justification.