3D MODEL DESCRIPTION

Mario Bros clock is made up of an external disk with the numbers and an internal disk with the image, the internal disk can be replaced with different images, I intend to upload them in the future, the clock is also complete with printable hands.

Mario Bros clock printed in color, the color change of the printer can also be used, it does not require AMS or MMU,
in the slicer program set the color change to the recommended height.

add a negative cylinder(if you use a different mechanism) to the Centre of the clock to create the correct size hole for your movement or alternatively drill the required size hole.

this is the mechanism I used: https://amzn.to/49jUvUC

3D PRINTING SETTINGS

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

Swap Instructions:
Start with Black
At layer #5 (0.56mm) swap to Azure Blue
At layer #7 (0.72mm) swap to Red
At layer #12 (1.12mm) swap to Yellow
At layer #16 (1.44mm) swap to Silver
At layer #18 (1.6mm) swap to Jade White for the rest.

if you want to change the color of the numbers and border make another color change

If re-scaling model make sure not to alter the Z height of the model