Egg Roll Basket / Eierspender
Copyright Claim
Egg Roll Basket / Eierspender
Boost
75
130
21
Print Profile(2)
0.2mm layer, 2 walls, 15% infill
Designer
5.1 h
1 plate
Custom support - 0.2mm layer, 2 walls, 15% infill
5.9 h
1 plate
Boost
75
130
21
0
249
126
Released
Description
Design for Large eggs (60mm).
It is for 12 eggs
After print you could remove the center column.
Print instructions
Infill: 15%
Tip for good surface quality.
0.2 layer and a thicker outside perimeter of 0.60mm worked great for me.
Prints with no support (it is magic). some support included must be cut after print
Please post a pic if you print
Thanks @Cisco3D from Printables:
https://www.printables.com/de/model/53124-egg_roll-basket
Comment & Rating (21)
All
Print Profile
0.2mm layer, 2 walls, 15% infill
Gedruckt mit A1 und BambuLab Filament. Standard Einstellungen. Mit dem Qualität leider nicht zufrieden
0
Reply
It appears the Filament might have too much moisture.
(Edited)2
Reply
superbe creation imprimer sur bambulab p1s et ami
sans support merci bonne fête a tous
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
great print
(Edited)
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
(Edited)
0
Reply
Print Profile
Custom support - 0.2mm layer, 2 walls, 15% infill
mauvaise texture avec le profil pour A1
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
lots of lines not smooth
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Other Issues:nothing
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
License
This work is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld