BMW M3 CRASHBAR MOUNT F80 F82 F87 Repair PLATES Srut bar

Mount for M3 for M3 F80 F82 F87 strut - Skan 1:1

We prefer CF15S / can be other material (abs not our recomendation)
Material used for production specification:
PA6 Low Warp CF15S

Low shrinkage and high strength enriched with the advantages of carbon fibers

Polyamide 6 is one of the strongest materials used in desktop 3D printing technology. It is characterized by a combination of mechanical strength, stiffness, vibration damping and abrasion resistance unattainable for other filaments. In addition to its wide range of properties, it can successfully add chemical resistance and the ability to operate continuously at high temperatures.

By introducing Spectrum PA6 Low Warp CF15S composite material, thermally stabilized, filled with carbon fibers, we decided to raise the bar for nylon filaments even higher. Spectrum PA6 Low Warp CF15S is a true specialist for heavy-duty applications. The "LowWarp" variety is characterized by additional admixtures aimed at improving the flow during material extrusion - and, consequently, better adhesion of material particles. The use of 15% carbon fibers more than doubles the stiffness and increases the tensile strength (up to 120 MPa). Additionally, Spectrum PA6 Low Warp CF15S has higher thermal resistance HDT - 180 C (0.45MPa), compared to the unfilled version. The fiber content reduces the shrinkage typical of most high-temperature materials, significantly facilitating the printing process and giving the prints an aesthetic, "carbon" appearance.

Spectrum PA6 Low Warp CF15S is the best choice when printing functional models that require high stiffness, continuous operation at high temperatures and chemical resistance. It can be successfully used in the automotive, aviation and modeling industries.

Technical data
Material:
PA6
Available diameter:
1.75 [mm]
Diameter tolerance:
+/- 0.03 [mm]
Density:
1.28 g/cm3
Thermal resistance:
HDT B - 180C
Surface Finish:
matte, carbon texture
Material properties
twice the stiffness compared to unmodified polyamide
high mechanical properties and abrasion resistance
excellent chemical resistance
thermal resistance HDT – 180 C (0.45MPa)
possibility of printing on desktop printers without a heated chamber
matte, carbon print surface
perfect bonding of layers
Application
functional prototypes
production tooling
active elements of devices and machines - rotors, gears
guides, toothed strips, guide rollers
production of security rings and plates with increased chemical and corrosion resistance

We do not guarantee durability - the product is a response to market needs. We haven't personally tested it on the car. The scan was performed by us 1:1.

https://tiny.pl/czptw

Mount for M3 for M3 F80 F82 F87 strut - Skan 1:1

We prefer CF15S / can be other material (abs not our recomendation)
Material used for production specification:
PA6 Low Warp CF15S

Low shrinkage and high strength enriched with the advantages of carbon fibers

Polyamide 6 is one of the strongest materials used in desktop 3D printing technology. It is characterized by a combination of mechanical strength, stiffness, vibration damping and abrasion resistance unattainable for other filaments. In addition to its wide range of properties, it can successfully add chemical resistance and the ability to operate continuously at high temperatures.

By introducing Spectrum PA6 Low Warp CF15S composite material, thermally stabilized, filled with carbon fibers, we decided to raise the bar for nylon filaments even higher. Spectrum PA6 Low Warp CF15S is a true specialist for heavy-duty applications. The "LowWarp" variety is characterized by additional admixtures aimed at improving the flow during material extrusion - and, consequently, better adhesion of material particles. The use of 15% carbon fibers more than doubles the stiffness and increases the tensile strength (up to 120 MPa). Additionally, Spectrum PA6 Low Warp CF15S has higher thermal resistance HDT - 180 C (0.45MPa), compared to the unfilled version. The fiber content reduces the shrinkage typical of most high-temperature materials, significantly facilitating the printing process and giving the prints an aesthetic, "carbon" appearance.

Spectrum PA6 Low Warp CF15S is the best choice when printing functional models that require high stiffness, continuous operation at high temperatures and chemical resistance. It can be successfully used in the automotive, aviation and modeling industries.

Technical data
Material:
PA6
Available diameter:
1.75 [mm]
Diameter tolerance:
+/- 0.03 [mm]
Density:
1.28 g/cm3
Thermal resistance:
HDT B - 180C
Surface Finish:
matte, carbon texture
Material properties
twice the stiffness compared to unmodified polyamide
high mechanical properties and abrasion resistance
excellent chemical resistance
thermal resistance HDT – 180 C (0.45MPa)
possibility of printing on desktop printers without a heated chamber
matte, carbon print surface
perfect bonding of layers
Application
functional prototypes
production tooling
active elements of devices and machines - rotors, gears
guides, toothed strips, guide rollers
production of security rings and plates with increased chemical and corrosion resistance

We do not guarantee durability - the product is a response to market needs. We haven't personally tested it on the car. The scan was performed by us 1:1.

https://tiny.pl/czptw