*.stl models are upside down, just rotate 180 in your slicer program

Please Note - These fenders require lightning rails to fit as designed. Learn more here:

• https://www.bobsstokeshop.com/product-page/lightning-rails

Below are fender deletes I made to work with lightning rails:

• https://makerworld.com/en/models/20754

There are two versions of this fender:

1. Casual (2 mount holes) - If you don't do crazy drops or stunts, or heavy trail riding this should work fine.
2. Pro (4 mount holes) - For the rider that likes to push their board to the limit.

Also be sure to buy a flight shield from flight fins (or print my version here) if you ride in wet areas. This has been designed to accommodate it, creating a full fender.

M5, 1 inch machine screws required. Do not use screws longer than this.

Print with Nylon or PETG. No supports required.

If you appreciate my work, please like and rate this model and post your makes.