Versatile Door and Window Stopper by Pulsar Designs

Pulsar Designs

Household>Other House Models

Print Profile(4)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

Inner part

Designer

52 min

1 plate

4.5(15)

Outer part

Designer

1 h

1 plate

4.9(11)

TPU, outer part, A1 mini

1 h

1 plate

PETG, inner part, A1 mini, 0.2mm layer, 2 walls, 15% infill

59 min

1 plate

Boost

127

192

183

Released

Description

This versatile door and window stopper can be used in a variety of ways to keep doors and windows open, even against stronger wind gusts. It can be positioned in the gap between a door and the floor, keeping it open similar to a standard wedge doorstop. However, it can also be wedged between the door and the wall. Works similarly for both hinged and sliding windows!

I recommend printing the outer part with a flexible material like TPU to protect surfaces, while the inner core can be printed with a harder material like PLA or PETG. Applying the “fuzzy skin” setting on the outer contour of the outer part can also be an aesthetic and functional improvement!

Simply snap both parts together and reinforce with a little glue, if needed.

Comment & Rating (26)

@yaWo

Print Profile

Outer part

Fits well together and works great 👍

@Knox_88

Print Profile

Inner part

Innen Teil mit ABSx und Außen mit TPU gedruckt, macht was es soll, das Fenster offen halten.

@Knox_88

Print Profile

Outer part

Den Äusseren Rand habe ich mit TPU gedruckt und innen in ABSx von Nobufil, lässt sich einfach zusammenstecken und macht was es soll.

@p.v.allmen

Print Profile

Outer part

Fits perfect the inner part

@p.v.allmen

Print Profile

Inner part

Light and robust.

@Deky899

Print Profile

Outer part

Greatm haven't had any problems, printed in PETG

@Deky899

Print Profile

Inner part

Haven't had much luck with the printing temp from the profile. Generic tpu profile with 240 deegrees was succesful, fuzzy skin is nice. Don't know what kind or brand the TPU was, got it from work and dried for a couple of hours.