These simple wall supports for the PS4 are very simple and functional, they print quickly and can be fixed with a screw or strong double-sided tape, glue and the like.You can easily print them in both PLA and PETG.
Assembly:
Fix the two lower ones first, then place the upper one in position above the PS4 and rest it against the wall, mark the fixing limit, remove everything and definitively block the upper support.From that moment you can slide the PS4 into these fantastic guides and it will stay locked!
-------------------------------------------------------------------------------------------
ITALIANO:
Questi semplici supporti a muro per la PS4 sono molto semplici e funzionali, si stampano velocemente e possono essere fissati con una vite oppure un forte biadesivo, collante e simili.
Potete stamparli tranquillamente sia in PLA che in PETG.
Montaggio:
Fissate prima i due inferiori, poi mettete in posizione quello superiore sopra la PS4 e poggiate al muro, segnate il limite di fissaggio, rimuovete tutto e provvedete a bloccare definitivamente il supporto superiore.
Da quel momento potete far scivolare la PS4 in queste fantastiche guide e resterà bloccata!