Several models of plate holder for Bambu X1.
Have been added:
-Plate holder for left/right table, with and without glue holder.
-Plate holder to stick with double-sided tape on the outside wall of the machine left/right, with and without glue holder.
-All versions have a place for the basic tools supplied with Bambu X1.
-The glue stick holder supports glue stick, Magigoo and 3DLAC.
**** IMPORTANT****
The glue-on version has not been tested. It is possible that it may fall off with the vibrations of the machine. If you are not sure, download the table top version.
******************
If you like my designs give me like and share. If you like them a lot invite me to a coffee.
https://www.buymeacoffee.com/kjbturok
https://www.paypal.com/paypalme/ChinadlaConchinchina
Thank you.
ESPAÑOL
Varios modelos de soporte para placa para Bambu X1.
Se an añadido:
-Soporte de placa para mesa izquierdo/derecho, con y sin soporte para pegamentos.
-Soporte de placa para pegar con cinta de doble cara en la pared exterior de la maquina izquierdo/derecho, con y sin soporte para pegamento.
-Todas las versiones tienen donde alojar las herramientas básicas que trae Bambu X1.
-El soporte para pegamento soporta barra de pegamento, Magigoo y 3DLAC.
**** IMPORTANTE****
No se a probado la versión para pegar. Es posible que esta se caiga con las vibraciones de la maquina. Si no estas seguro descarga la versión para mesa.
******************
Si te a gustado por favor dame un me gusta y comparte. Si te a gustado mucho, invítame a un café!.
https://www.buymeacoffee.com/kjbturok
https://www.paypal.com/paypalme/ChinadlaConchinchina
Gracias!.