-This is a big and flat print. Warping is a possible outcome. In BambuStudio the model is rotated for better airflow around the model to prevent this as much as possible. Glue on the build plate helps a lot too and I recommend that you use it! If you are using any other filament branding other than BBS - Follow the nozzle and build plate temperature recommendation by the company you're using!
Made by: “Lupis1” on Thingaverse.
10% Infill (Gyroid)
0,2mm LH
2 walls
190mm/s outer wall (for less warping and stringing)
0,4 nozzle