Marble Castle - Desk Fidget Toy
Copyright Claim
Marble Castle - Desk Fidget Toy
Boost
521
953
141
GIF
Print Profile(2)
3 Plates 0.2mm layer, 2 walls, 15% infill
Designer
3.7 h
3 plates
ALL in One Color 0.2mm layer, 2 walls, 15% infill
Designer
3.4 h
1 plate
Boost
521
953
141
9
863
1.2 k
Released
Description
I designed a Rework for Ø14 balls => Marble Castle Rework
Marble Castle is a functional, easy printable Toy.
Push the Button to let the marble climb the stairs and rotate the knob to rotate the house to let the marble go further.
What you need to assembly:
- Spring Ø4 from an ballpoint pen (Cut it to around 15mm)
- 7mm-10mm marble/steelball, Ø9 works best for me!
- small rubber band
- optional 2 pieces Ø10x 3mm magnets
A like & follow costs nothing just like the 3D model! Thank you 🤗
Update 10.11.23
- Added a revision hole in the base for spring mechanism
- optimized some clearance
Commercial license you can get here:
Comment & Rating (141)
All
Print Profile
3 Plates 0.2mm layer, 2 walls, 15% infill
very nice design and buitfull print. the two half fit so perfectly together that I did not need magnets or glue. The angle of the staircase lifter could be a little bit steeper. Sometimes the ball gets stuck there. But the best thing would be a gear system on the bottom instead of the rubber band. But I admit that is over engineering but cool.
Additionally you can add a ball on plate 2 for those that don’t have a metall ball. https://makerworld.com/models/61688
(Edited)
The designer has replied
2
Reply
Thank you for the detailed review and the nice suggestions.
0
Reply
thank you
0
Reply
I tried but I couldn’t find a ball the perfect size.
0
Reply
Print Profile
3 Plates 0.2mm layer, 2 walls, 15% infill
Saw this and had to print it. I find it so fun, like the steps to lift the ball and like that it uses household stuff nothing special order. I do think make some printed gears instead of a rubber band might be better but it still functions well with the rubber band.
The designer has replied
1
Reply
Thank you very much for the nice review! I appreciate that🤗 Maybe i work for an updated version😉
0
Reply
I made a completely rework from scratch for D14 balls. And it has gears😉 Posted today...Have a look🏰
0
Reply
Print Profile
3 Plates 0.2mm layer, 2 walls, 15% infill
Leider wurde die Ecke bei meinem a1 nicht richtig gedruckt. Sonst sehr schön.
(Edited)
The designer has replied
0
Reply
Schade, das hat mit der Kühlung zu tun! Wars der A1mini? Mit P1S und X1C hab ich das Teil jetzt insgesamt 5x gedruckt immer mit Ecke. Aber finde es sieht trotzdem hübsch aus👍🏼
0
Reply
Replying to @BamBamDesign
war mit einem A1... Ja sieht trotzdem gut aus.. Ich gebe mal einen Stern mehr für den Durchschnitt... war vielleicht bisschen zu übertrieben 😂
(Edited)1
Reply
Replying to @BenniBiene
Danke das ist nett, man kann ja nicht immer alles durchtesten😉
0
Reply
Boosted
Print Profile
3 Plates 0.2mm layer, 2 walls, 15% infill
What a great idea ❤️
The designer has replied
1
Reply
Thank you for your comment. I appreciate that 🤗
0
Reply
Very nice toy.
A) For Dad to check reliability and precison of the brandnew BambuLab A1.
B) For the Kid to play with it.
- Magnets fit perfect.
- Printed arcs with support, no problem of removing.
- Need to find a better rubber band, little lube on the tower axis doesn't hurt.
Great model! Thanks for sharing!
(Edited)
GIF
The designer has replied
1
Reply
Thank you very much for your great review. I decided to create a revised version without the rubber band. I hope I find the time soon. Best regards 👋🏼
0
Reply
Print Profile
3 Plates 0.2mm layer, 2 walls, 15% infill
I printed with 200% so a 16mm marble will fit
Perfekt no issue
The designer has replied
1
Reply
Thanks for trying and sharing this information. Looks beautiful 😍
0
Reply
Print Profile
3 Plates 0.2mm layer, 2 walls, 15% infill
Awesome toy! Very well engineered. Easy print and came out really nicely
The designer has replied
1
Reply
Thank you Freekers👍🏼
0
Reply
Print Profile
3 Plates 0.2mm layer, 2 walls, 15% infill
Work very well 😄
The designer has replied
1
Reply
Cool 😎 Thanks for picture and rating😉👍🏼
0
Reply
Print Profile
3 Plates 0.2mm layer, 2 walls, 15% infill
Worked all fine
The designer has replied
1
Reply
Thank you very much for the review with pics! have a nice day😃
0
Reply
Thank you for the great design. My kids, an also myself, like it :-)
The designer has replied
1
Reply
Thank you very much for the review with pictures👍
1
Reply
License
This work is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
© 2024 MakerWorld