Sprache/Language: Deutsch + English
Build plate #01: mesh with higher resolution (DanyRebornPrint), smothed body and more realistic body shape, updatet 10/12/2023.
Build plate #02: mesh with lower resolution, as can see in the pictures (DanyPrint).
The printing time here is 10 hours, with a layer height of 0.12mm. Because of the details and overhangs, i chose a low print speed. The high wall count supports print quality. The speed for the component fan should be at 100%. In the first two layers I turned off the component fan. AUX fan should be off. I print PLA at 215°C with a closed printer. It can also be printed open. Support structure are activated and are created automatically.
If the speed is too high, there is a risk that parts of the model will be torn off at critical points. That was always my fundamental problem with quickly printing such 3D characters.
The figure is 155mm high. Smaller sizes may fail and be fragile.
If you do not use the specified print profile, it is possible that the print will fail or not be as good.
How to print correctly:
My print profile has not only been checked once, it has not only been checked twice, it has not only been checked three times, even printing successfully four times is not enough. In short, I use these profiles again and again in one way or another and I know that they work and why they work the way they do. If you have created a better print profile or another material that you believe is better or equally good, please post it here!
Have fun printing!
Die Druckzeit beträgt hier 10h, bei 0.12mm Schichthöhe. Wegen der Details und Überhänge habe ich eine niedrige Druckgeschwindigkeit gewählt. Die hohe Wandanzahl unterstützt die Druckqualität. Die Geschwindigkeit für den Bauteillüfter sollte bei 100% stehen. In den ersten beiden Schichten habe ich den Bauteillüfter ausgeschaltet. AUX-Lüfter sollte aus sein. Ich drucke PLA mit 215°C mit geschlossenem Drucker. Es kann auch offen gedruckt werden. Stützen sind aktiviert und werden automatisch erzeugt.
Ist die Geschwindigkeit zu hoch, besteht die Gefahr, dass Teile des Modells an kritischen Punkten abgerissen werden. Das war immer mein grundsätzliches Problem, mit schnellen Drucken solcher 3D-Charaktere.
Die Figur ist 155mm hoch. Kleinere Größen können misslingen und zerbrechlich sein.
Wenn Sie nicht das vorgegebene Druckprofil verwenden, dann ist es möglich, dass der Druck misslingt oder nicht so gut wird.
So drucken Sie richtig:
Mein Druckprofil ist nicht nur einmal geprüft, es ist nicht nur zweimal geprüft, es ist auch nicht nur dreimal geprüft, selbst viermal erfolgreich gedruckt reicht noch nicht. Kurzum, ich verwende diese Profile immer wieder so oder so ähnlich und weiß, dass Sie funktionieren und warum sie wie funktionieren. Wenn Sie ein besseres Druckprofil erstellt haben oder für ein anderes Material, von dem Sie überzeugt sind, dass es besser oder gleich gut ist, dann bitte ich Sie, es hier zu veröffentlichen!
Viel Spaß beim Drucken!
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.