Battle Droid Figurine - Heavy
Copyright Claim
Battle Droid Figurine - Heavy
Boost
482
732
46
Print Profile(3)
0.16mm layer, 3 walls, 20% infill
Designer
7.5 h
1 plate
All printers - 0.16mm layer, 3 walls, 20% infill - tree support
8.8 h
1 plate
Multicolor - 0.16mm layer, 2 walls, 20% infill
14.6 h
1 plate
Boost
482
732
46
3
1.5 k
314
Released
Description
Print your own scale model Battle Droid!
This model comes in 2 pre-exported scales - 1:12 and 1:48
The 1:48 scale model is more geared towards resin printing for wargaming but the 1:12 model works great for printing on an FDM printer!
Find more figurines like this at: https://patreon.com/galacticarmory
Comment & Rating (46)
All
Print Profile
0.16mm layer, 3 walls, 20% infill
Yes, there were a lot of supports, but that is to be expected with a model like this. It took me a little over 30 minutes to carefully remove all supports, but it was worth it. I colored the designers model.
1
Reply
Did you use your own profile? if so, mind sharing your settings? thx
0
Reply
Print Profile
0.16mm layer, 3 walls, 20% infill
(Edited)
Support Issue:Impossible to remove supports in that profile. These are probably great on a resin printer but don't waste your time on a Bambu.
3
Reply
yes me too! wasted a ton of filament and time!
after meddling with tree support settings 2/3 times i finally managed to get a successful print only to break it while trying to remove supports.
parts are too fragile
0
Reply
Print Profile
All printers - 0.16mm layer, 3 walls, 20% infill - tree support
Perfect print on a1 mini with wood PLA
Supports complicated to remove
1
Reply
The supports are basically impossible to remove. :( Couple of hours trying to remove supports and ended up having to throw the entire print in the garbage as it broke many times in many places before the supports would give way. Don't bother to print unless you are on a resin machine.
(Edited)6
Reply
Print Profile
All printers - 0.16mm layer, 3 walls, 20% infill - tree support
98%都成功了 但是嘴哪里没有了 不知道为什么 回头再打印一个试试
0
Reply
Print Profile
0.16mm layer, 3 walls, 20% infill
Printed in PLA Basic Gold.
I love the model, thank you so much!
0
Reply
fantastic in resin 🙂
0
Reply
yeah I printed in PLA @ default settings with a 4mm end, had the same problem as 1 or 2 with the supports being stuck in all sorts of places but printed almost perfectly so apart from the support issue all good. I usually don't use the tree so next time I'm using the normal box default.
0
Reply
Print Profile
0.16mm layer, 3 walls, 20% infill
(Edited)
Other Issues:generated supports are hard to remove some supports even on base, that ruins look. model looks great, but supports could been placed manually and better as seem supports were auto generated
0
Reply
is there a version that's cut and keyed?
1
Reply
License
This work is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Related Models
© 2024 MakerWorld