Deburring Tool Case
Copyright Claim
Deburring Tool Case
Boost
183
274
66
Print Profile(2)
0.16mm layer, 2 walls, 15% infill
Designer
2.6 h
1 plate
0.16mm layer, 2 walls, 15% infill
2.8 h
1 plate
Boost
183
274
66
1
357
259
Released
Description
It is a deburring tool case, the spare blades can be stored in the side compartment and an additional magnetic lid prevents them from falling out. Other small parts can also be stored in the other two compartments.
The tool case has a print-in-place hinge and holds together perfectly thanks to four magnets so that the case cannot open on its own.
The deburrer is held in place by four small curves in the recess provided.
I used 6x2 magnets for the project; a total of 8 magnets are needed for the case.
The printing time is approx. 2.30 minutes.
Have fun Printing!
Comment & Rating (66)
All
Print Profile
0.16mm layer, 2 walls, 15% infill
gutes Topmodell.
1
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Einfach Mega. Habe es mit PETG CF auf einer Carbon Optik Platte gedruckt. Super
1
Reply
Top, mehr fällt mir dazu nicht ein. Ich habe es mit PETG CF auf der Carbon Optik Platte geruckt. Genial
1
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
fast perfekt geworden
1
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Flawless print. Much needed.
1
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
works great! and magnets friction fit perfectly
1
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
I used PLA-CF for this and love the look.
1
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Printed well.
1
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Nice little box I’ve added some text
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
works fine!
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
© 2024 MakerWorld