打印方式

使用100%充填，0.08层高，0.16首层打印

最开始使用黑色

在#3层 (0.32mm)切换成蓝色

在#4层 (0.4mm)切换成湖蓝

在#6层(0.56mm) 切换成白色

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Kexcelled Black Transmission Distance: 0.2
PLA Kexcelled Blue Transmission Distance: 3
PLA Kexcelled Lake Blue Transmission Distance: 3.6
PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #3 (0.32mm) swap to Blue
At layer #4 (0.4mm) swap to Lake Blue
At layer #6 (0.56mm) swap to Jade White for the rest.