[HueForge] BooBee [AMS Ready]
Print Profile(1)
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA Protopasta Cobalt Blue Transmission Distance: 5
PLA Protopasta Partly Sunny Yellow Transmission Distance: 12
PETG GEETECH Gray Transmission Distance: 3
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Cobalt Blue
At layer #22 (1.84mm) swap to Partly Sunny Yellow
At layer #32 (2.64mm) swap to Gray for the rest.
Comment & Rating (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
