Babel Fish Hue Forge Painting. This one takes two AMS, or requires changing the Colors in the AMS strategically, or just manually swapping. This uses 6 colors.

I wanted to upload a 3mf for this print, but makerworld won't let me, and times out while trying to slice it….

But it does slice just fine, I think it does take a lot of time tho

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA Hatchbox PLA Pro+ Red Transmission Distance: 5.3
PLA PolyLite Azure Blue Transmission Distance: 3
PLA BambuLab Basic BambuLab Green Transmission Distance: 8
PLA PolyLite Purple Transmission Distance: 0.5
PLA BambuLab Basic Yellow Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #14 (0.68mm) swap to Red
At layer #29 (1.28mm) swap to Azure Blue
At layer #37 (1.6mm) swap to BambuLab Green
At layer #51 (2.16mm) swap to Purple
At layer #52 (2.2mm) swap to Yellow for the rest.