An easy-to-print side spool holder for Bambu Lab P1P and X1C. Initially designed for the ARC enclosure, it will also work on X1C and barebone P1P. Should work on Vision and other enclosures too.

BOM:

• M3x8mm - 1pc
• M3x10mm - 1pc
• ptfe tube OD4mm - 87mm

Instructions:

• This part is designed to be rigid and would do well with rigid filament ie PLA, PLA+, ABS and ASA
• I would not recommend PETG or Nylon.
• You may need to add X&Y compensation if you are printing with ABS to counter shrinkage
• Print with no support needed. (see image). I have included a 3mf file with print orientation.
• Print → Insert ptfe tube → Mount to frame → Mount the spool. Easy

There is no Patreon or OnlyFans (hahaha). However, if you like my designs and want to contribute to my coffee addiction & help fund the filaments I need for prototyping, a contribution to my Ko-fi or paypal.me will be greatly appreciated.

Caveat

As with all my designs, it may and may not work for you. So print and install at your own discretion.