The One ring Lord of the rings Hueforge
Copyright Claim
The One ring Lord of the rings Hueforge
Boost
140
230
40
Print Profile(2)
0.08mm layer, 2 walls, 100% infill
Designer
16.1 h
2 plates
P1S & others (less filament -> 100% infill for hueforge, 15% infill for ring & frame)
7.7 h
2 plates
Boost
140
230
40
4
298
191
Released
Description
The One Ring
From of the poster of the original movie remade in HUEFORGE;
Added the one ring on it
is mate black, red white and gold
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA Sunlu red Transmission Distance: 5
PLA Sunlu silk gold Transmission Distance: 5
PETG JAYO White Transmission Distance: 6
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to red
At layer #12 (1.04mm) swap to silk gold
At layer #16 (1.36mm) swap to White
At Layer #22 swap to psilk gold for the rest.
The frame is in matte black
Comment & Rating (40)
All
Looks grate, Thanks
☆☆☆☆☆
My first one did print but the underside of the ring was rough. So I printed it in two pieces and glue together, but it was only my 3rd print on a new printer and I am still dialing it in.
The designer has replied
0
Reply
so beautyfull thank you ;)
0
Reply
So far it did this twice..But hey its bambulab so who knows what is the source of the problem..i might retry it on .y friend x1c cuz the guy who work at the grocery stopped breathing for 2 minute when he saw. they have poor pay and hes a jolly fellow so i might give it another shot.wish me luck
The designer has replied
0
Reply
OMG 😱😱😱😱 What happened? You said it's a x1c but according to the screen it seems to be a P1 p or s.
but that tool head seems to need holidays lol.... good luck for the repair ....
0
Reply
I guess it needs supports? Everything was fine until the ring.
The designer has replied
0
Reply
hello, I made without support effectively the underbpart is a little rough but not visible so ....
0
Reply
Print Profile
P1S & others (less filament -> 100% infill for hueforge, 15% infill for ring & frame)
Awesome design!
0
Reply
👍👍👍
0
Reply
Print Profile
P1S & others (less filament -> 100% infill for hueforge, 15% infill for ring & frame)
turned out great! 👍
0
Reply
Print Profile
P1S & others (less filament -> 100% infill for hueforge, 15% infill for ring & frame)
Very very cool. Nice work :)
0
Reply
Print Profile
P1S & others (less filament -> 100% infill for hueforge, 15% infill for ring & frame)
One Ring to Rule them all! This is so amazing!
0
Reply
Print Profile
P1S & others (less filament -> 100% infill for hueforge, 15% infill for ring & frame)
I really love this print! The 3D ring really adds a great element to a hueforge print. I printed without supports and the overhang on the ring was messy but after a clean up it looks good. When hung on the wall and with the nice frame you can't see the clean-up of the overhang on the ring. The frame is a great addition to make this print look great. Thanks for the print!
0
Reply
Print Profile
P1S & others (less filament -> 100% infill for hueforge, 15% infill for ring & frame)
LOVE this print! Turned out great…Thank You!!
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
© 2024 MakerWorld