Upgrade your Ender 3 Pro!

This is a dual-drawer storage solution for your Ender 3. It fills the gap between the motherboard and the screen with two drawers to store whatever you want. Though, it was designed with storing the included tools with the printer in mind; in addition to anything else related (extra nozzles, wheels, etc.) The bottom drawer is empty to accommodate larger tools while the top drawer is divided into sections for convenience.

To fit, you'll have to temporarily remove the bed belt tensioner as well as the screen to slide the case through the gantry to fit the part. Once in, reinstall both, slide the drawers in and you're done!

For the latest Ender 3 Pros purchased from Microcenter, note that their height may require the addition of feet to prevent the weight of the printer from resting on the box. (Good thing I posted another model to address this!) Additionally, if you have a newer Ender 3 Pro, it's advisable to reverse the bed Y-Axis wheel screws, as the hex nuts are installed on the underside causing clearance issues. To do this, unscrew the bed wheels, remove the bed, and use the supplied wrench and allen key to invert the wheels, ensuring the hex nut faces up.