Bracket for SeeMeCNC Y-Filament Splitter
Copyright Claim
Bracket for SeeMeCNC Y-Filament Splitter
Boost
6
12
5
Print Profile(1)
(High Quality) 0.16mm layer, 2 walls, 15% infill
Designer
21 min
1 plate
Boost
6
12
5
0
15
6
Released
Description
I've been using this y-splitter from SeeMeCNC for a while now. Other than the price it's the best y-splitter available. The only thing I didn't like about it was that it didn't securely attach to the printer and would just flop around. So I threw together this bracket to solve that.
You'll need the following parts to complete this:
(1) 8x3 magnet
(2) M2 x 10-14mm socket head screws
(2) M2 x 3.5mm OD x 3-4mm L heat set inserts
Warning: If you print a third party profile you may not be getting the latest version or the highest quality print.
If you like this project, please don't forget to ❤ Like and ★ Rate!
* Some of the links above are Amazon Affiliate links
Comment & Rating (5)
All
looks like the M2 x 10-14mm socket head screws points to the magnets :-) not the screws
The designer has replied
0
Reply
Thanks so much for the feedback!
0
Reply
Cool, I'm thinking about get this y-splitter. Have you had any issue with it? Do you know what material is made of? It looks like SLS or some kind of silicone casting. Thanks
0
Reply
Print Profile
(High Quality) 0.16mm layer, 2 walls, 15% infill
Printed and fit adapter well thanks
0
Reply
Print Profile
(High Quality) 0.16mm layer, 2 walls, 15% infill
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Related Models
© 2024 MakerWorld