So I purchased a 10x10 Ozark Canopy and had it setup the other day and a wind gust flipped it and snapped one of the legs. So I thought I'd just order a replacement leg. Well you can't get one, I tried online etc. So then I thought I'd just buy from Grainger a replacement Aluminum tube and I'd drill some holes and I'd be all set. Well Ozark(A Walmart Company) purposely makes all the adapters for the leg in a non squared, angled corner shape so you can not fix it yourself. They'd rather you go and spend another $200 for a new canopy.

Well I decided to take some time and design replacements for all the connectors of the leg that are square in shape and will accommodate square tubing. I also created the top leg sliding bracket that you push up when opening the canopy.

Listed below is a link to my original canopy from Walmart, a link to Grainger website where you can purchase the aluminum tube from. And of course, my STL files for all the replacements.

Please validate that your canopy uses the same types of connectors before you start down this path. It seems looking at my other canopy's that I own that they are all similar.

Original Canopy - https://www.walmart.com/ip/Ozark-Trail-10x10-Commercial-Canopy-With-Sidewalls/400459949

Grainger Website for Aluminum Tubing - https://www.grainger.com/product/GRAINGER-APPROVED-Square-Tube-6ALR0?searchBar=true&searchQuery=6ALR0