Bonsai Tree (Jewelry Display) by maximdivirgilio

maximdivirgilio

Household>Decor

Print Profile(1)

All

P1P

P1S

X1 Carbon

X1E

0.1mm layer, 2 walls, 15% infill

Designer

18.1 h

1 plate

5.0(4)

Boost

269

326

354

Released

Description

This project prints in 40! different pieces, all of which get super glued together.

The project is delicate and requires patience and care. It however results in a very, very nice decoration piece.

======================================================================

This project requires:

-150g of your filament of choice

-Superglue (CA glue)

-Small stones (Optional)

-Sand to weight the pot (Optional)

For this project I used:

-BambuLab PLA-CF (Green)

-BambuLab PLA-CF (Grey)

-Hatchbox Wood PLA (Dark)

Please feel free to chat me if you have any questions or confusion!

Comment & Rating (22)

@ShortyTHEone

Print Profile

0.1mm layer, 2 walls, 15% infill

nice files, came out super awesome, pieces are a bit tricky to glue together but overall I’m pretty stoked. great print quality

The designer has replied

@maximdivirgilio

I am super super glad you are happy with the results! I agree and believe me, I got super frustrated trying to get some of those leave bunches to line up precisely. Unfortunately, it is still the best way I can come up with for going about it. At the very least, if you take the time, they come out super nice. Thank you for the comment, I am super happy you enjoy the print!

(Edited)

@ShortyTHEone

Replying to @maximdivirgilio :

I finished all parts by now and glued the whole tree together, sadly a small piece down the trunk broke of when peeling it off the blase (Part A) but it’s not that bad. but what is the peg on the plate for the pot for? lift it? because it tends to fall over. any advice?

@maximdivirgilio

Replying to @ShortyTHEone :

Oh, yes. That peg plates acts as a 'table' that sits down in the pot and gets rid of a bunch of the empty space. I filled the empty space of mine with sand.

(Edited)

@AdamSid

Print Profile

0.1mm layer, 2 walls, 15% infill

Very nice, ty!!!

@kam10379

really cool 😎

@user_2090137511

nice model，thank you

@whomst

The manner of uploading with one print profile with one plate (and 3 separate 3MF source files) means users of the mobile app cannot gain any value from your print profile. They would have to then set up their own profiles for the other two 3MF

The designer has replied

@maximdivirgilio

Interesting. I will add print profiles for the other two.

@whomst

it is also possible to have a single print profile include three separate plates that can have their own settings, a feature of the bambu studio slicer but thank you regardless for coming up with a solution

@ShortyTHEone

did you forget to upload the tree?

The designer has replied

@maximdivirgilio

Can you elaborate? I am not sure your issue

@ShortyTHEone

Replying to @maximdivirgilio :

just saw you uploaded the files as raw files. I was using bambuhandy and the raw files aren’t displayed there. on the app you only see ready to print profiles, not the raw files. so you uploaded the 3mf for everything but it’s not displayed on bambuhandy. you did nothing wrong. but maybe you should upload the other files a print profiles as well. would much appreciate it

@paulbattista

Replying to @ShortyTHEone :

Yeah, just ran into the same issue. my first time printing off the app and I printed the foliage successfully but couldn't figure out how to print the trunk.

@p.strauss

everytime io open it i just have the leaves. no tree

The designer has replied

@maximdivirgilio

The branches are in the raw model files