608 Bearing Wheels for Bambu AMS
Copyright Claim
608 Bearing Wheels for Bambu AMS
Boost
34
83
23
GIF
Print Profile(3)
0.2mm layer, 2 walls, 15% infill
Designer
1.2 h
1 plate
Print on A1 MINI - 0.2mm layer, 2 walls, 15% infill
1.5 h
1 plate
0.6mm nozzle, 0.3mm layer, 2 walls, 15% infill
1.1 h
1 plate
Boost
34
83
23
0
61
24
Released
Description
Allows you to easily roll the AMS under another on a stand.
I tried to make this fit both the NEW and the OLD AMS versions, please let me know how it fits the older model. I have the newer one and it works great.
Comment & Rating (23)
All
The idea is good, but you should give the resistance and design a second thought. 2 walls and so little filling is very weak for a system that must support about 8kg. If you squeezed the height a little with that assembly, since 2cm is lost, people would want it more.
The designer has replied
0
Reply
Have had no issues from mine or reported to me. I suppose PetG would be stronger. They dont really move or anything.
0
Reply
Replying to @TripleGWorkshop
Do you think it's possible to snug the wheels up a little closer in the model to have the top sit a little lower to maximize the clearance? I'm about to print this but a little worried it might not quite fit under my shelf. It looks like there might be a little bit of space available in the photo but hard to tell.
0
Reply
Replying to @wyld
It's pretty much as low profile as I could get it. Give it a try
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Pretty clever solution to quickly get rolling capability added to your AMS. If you have a newer AMS, the slots may not line up perfectly with the gaps in the sides due to Bambu having made several variations of the AMS housing. I was able to get this to work on my newer AMS (March 2024) but lost a little bit of clearance due to the extra height. Not ideal but still the best model I found for this purpose.
The designer has replied
0
Reply
Thanks for working it out. Should I add your variation?
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Very easy printing and very useful, thank you!
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Fits perfectly. Had my AMS ontop of my P1S, but my 2nd AMS comes this week so printed this up, I'm currently printing your AMS stands too now to go with it so my two AMS can stack together nicely.
The designer has replied
0
Reply
With the wheels on it doesn't quite fit under the top ams, but it does go partly under
0
Reply
Replying to @TripleGWorkshop
well that sucks. I'm sure it's a simple fix though with just using some spacers
0
Reply
Replying to @DamianSov
Yeah or add 2cm to the stand sides
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Druck ist super nur etwas fragil mit dem AMS.
eine seite ist leider gebrochen nach 3-4 benutzungen. gedruckt wurde in ABS.
mit 5 Windstärkeen und gyro fill gabs keine probleme mehr.
0
Reply
Good idea ;)
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Share Alike
© 2024 MakerWorld