Photo Studio Stand [ A3 sheets ]
Copyright Claim
Photo Studio Stand [ A3 sheets ]
Boost
103
126
58
Print Profile(4)
Normal - 0.2mm layer, 2 walls, 35% infill
Designer
1.4 h
1 plate
Normal (A1 Mini) - 0.2mm layer, 2 walls, 35% infill
Designer
1.5 h
1 plate
![Away from fan --> no brim needed, yet fast, Gyroid, [Tested], 0.16mm layer, 2 walls, 10% infill](https://makerworld.bblmw.com/makerworld/model/US9af35182920a61/design/2023-11-20_d7c9553d1cbc3.jpg?image_process=resize,w_100/format,webp)
Away from fan --> no brim needed, yet fast, Gyroid, [Tested], 0.16mm layer, 2 walls, 10% infill
1 h
1 plate
0.2mm layer, 3 walls, 10% infill
57 min
1 plate
Boost
103
126
58
2
281
173
Released
Description
Comment & Rating (58)
All
Print Profile
Normal - 0.2mm layer, 2 walls, 35% infill
Very good print! I have one small improvement: perhaps you could make the back end a little wider to one side. Then you still wouldn't need any support and the feet might gain a little more stability.
But it works very well as it is :)
The designer has replied
1
Reply
hi, as upgraded version u can use the a3 version. let me know! :)
0
Reply
Replying to @franceschelli
This is the A3 Version :)
(Edited)1
Reply
Replying to @Habitaritus
oh sorry, I tough it was the a4
(Edited)1
Reply
Print Profile
Normal - 0.2mm layer, 2 walls, 35% infill
Utile e ben disegnato!
The designer has replied
1
Reply
grazie! 🙏
0
Reply
Print Profile
Normal - 0.2mm layer, 2 walls, 35% infill
It’s one of those things that you don't know you need until you print it 😄Works perfectly 👌🏻
The designer has replied
1
Reply
thank you 🙏 👍
0
Reply
Print Profile
Normal - 0.2mm layer, 2 walls, 35% infill
Ottima stampa e molto utile
1
Reply
Print Profile
Normal - 0.2mm layer, 2 walls, 35% infill
Printed nicely in PLA
1
Reply
Print Profile
Normal - 0.2mm layer, 2 walls, 35% infill
Nice print. Works as expected.
(Edited)
1
Reply
Print Profile
Normal - 0.2mm layer, 2 walls, 35% infill
smart product for small photoshoot
(Edited)
1
Reply
Boosted
Print Profile
Normal - 0.2mm layer, 2 walls, 35% infill
thanks! Helpfull tool!
0
Reply
Print Profile
Normal - 0.2mm layer, 2 walls, 35% infill
no problems
The designer has replied
1
Reply
thanks
0
Reply
Useful, thanks
2
Reply
License
This work is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld