马里奥问号纸巾盒Tissue box Super Mario Question mark
Remixed by
Boost
22
61
20
Print Profile(2)
0.2mm layer, 3 walls, 15% infill
Designer
27.7 h
5 plates
0.2mm layer, 3 walls, 15% infill
37.2 h
10 plates
Boost
22
61
20
0
159
42
Released
Description
根据马里奥撞金币的问号盒子模型改造的纸巾盒，
2个大金币用来把纸巾垫高的。
小金币可以从盖子的口穿过。
2024/3/6优化了盖子和盒子的连接方式，改成了圆形的螺纹连接，这样省去了旋钮等小零件，提升了使用体验。
Comment & Rating (20)
All
2024/3/6优化了盖子和盒子的连接方式，改成了圆形的螺纹连接，这样省去了旋钮等小零件，提升了使用体验。
The designer has replied
0
Reply
想问一下，不加支撑会不会有问题？因为我的是A1mini，勉强放下盒子。
0
Reply
Replying to @islands2419
支撑还是要的，你可以把树形支撑改成用普通支撑，这样支撑是按照支撑面垂直向下的，就不会像树形支撑占那么多面积。
0
Reply
Replying to @user_1820675680
好的，感谢！
0
Reply
本来想把盖子拧到和边缘垂直，发现会卡住，只能拧到这个位置了，强迫症有点难受，不过这不算什么问题。
想提几个建议：
1.盖子横向开口能否再大点。
2.壁厚能否薄点，挺沉的。
以上两点都可以方便拿纸，要不然就要专门买比较窄的纸，才能轻松放进去。
底部的问号和螺纹，个人感觉可以不要，不过这个也不算问题。
The designer has replied
1
Reply
哈哈，谢谢建议，1、可以把盖子的打印配置里 单独给盖子的x-y 外轮廓尺寸补偿 加一个参数 -0.2mm或者-0.5mm，这样盖子轮廓就能再缩小一些了 2、可以把“常用”配置里的 “系数填充密度”改小一些，从15%降低到10%，这样可以轻一点点。模型的壁厚只有等我空了再优化哈
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
had a little issues. The corner button don’t thread into the holes but glue and a hammer worked great. everything else fit perfect and looked quality
(Edited)
The designer has replied
1
Reply
It is suggested that an external Contour reduction parameter XY Hole/Contour compensation can be added to the corner button with a reduction value of -0.1mm.
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
It's quite big to put Tissue in side. I need to put something under tisue rool up for 1 inch to make it lift up and easier to used. Anyway my son take it already. LOL
The designer has replied
0
Reply
eah, the big gold coins in the profile are for the paper towels. Haha. Thank you for your 5 stars. My pleasure
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
(Edited)
The designer has replied
0
Reply
Thank you very much for your rating. How does it look in print? Can I have a look at your printout?
0
Reply
It came out really nice
(Edited)
1
Reply
Replying to @user_1820675680
l like it it's awesome 🤗
(Edited)
1
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
The designer has replied
1
Reply
谢谢评分，实物打出来了吗？效果如何？能否看看照片？哈哈
0
Reply
thank you.
(Edited)
1
Reply
Replying to @bklyncoastie
hh very nice！
0
Reply
No more
This remix is based on
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld