Dog Poop Bag Holder by bdwilson

bdwilson

Household>Pets

Print Profile(4)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

Scaled to 60% - 0.2mm layer, 2 walls, 15% infill

Designer

22 min

1 plate

4.7(6)

Scaled to 55% - 0.2mm layer, 2 walls, 15% infill

Designer

19 min

1 plate

5.0(4)

Scaled to 65% - 0.2mm layer, 2 walls, 15% infill

Designer

24 min

1 plate

5.0(2)

0.24mm layer, 2 walls, 15% infill

54 min

1 plate

4.5(4)

Boost

Released

Description

Summary

Needed a dog poop holder with a bigger hole to connect to my existing dog poop roll. Also large enough to fit a carabiner. To use, tie a knot in your poop bag and put the knot into the larger hole and pull it down through the slot. Large enough to hold several poops before emptying!

NOTE: The above picture is it printed at 60%. I have included 55, 60 and 65% sizes, but I do find the 60% one to work best for me.

Comment & Rating (18)

@Unforgivenll

Print Profile

Scaled to 60% - 0.2mm layer, 2 walls, 15% infill

Bambu Lab PETG CF Brick. Thank you.

@ColemanDesigns

Print Profile

0.24mm layer, 2 walls, 15% infill

Works well but very large in size

(Edited)

@col4444

it’s a big ungainly thing but it is perfect for holding my dog ball chucker, as well as any full dog poop bags prior to disposal. I love it, use it every day. Thanks OP👍

(Edited)

The designer has replied

@bdwilson

Reduce it in size to like 65%

@AteCzek

Print Profile

Scaled to 55% - 0.2mm layer, 2 walls, 15% infill

Nice print - scalled to 50% and work perfect

@tomhedlund

Print Profile

Scaled to 55% - 0.2mm layer, 2 walls, 15% infill

Awesome

@caldric

Print Profile

0.24mm layer, 2 walls, 15% infill

ok but the start from the slot is a little bit to tight

@dubmobile

Print Profile

Scaled to 60% - 0.2mm layer, 2 walls, 15% infill

it printed nicely but I think the design needs a little work. it tore my bags because it didn’t flex when I pulled a trial bag (filled with rocks) through. might have been the bags I use too- YMMV.