Super Mario Box Earrings
Boost
33
57
3
Print Profile(1)
0.2mm nozzle, 0.14mm layer, 4 walls, 100% infill
Designer
1.3 h
1 plate
Boost
33
57
3
0
40
8
Released
Description
Some simple “Super Mario Box” earrings (might work as keychain as well → would use PETG instead of PLA in that case).
Please use my print profile and a 0.2 nozzle to get a decent result.
Print on textured plate to have a nice surface finish.
The colored layers are only 0.5mm in total to keep down printing time.
As a result of this you might see black shadows through bright surface colors from black top layers (1mm in total).
If you like to have brighter colors just change size/ratio of assembled objects as you wish.
Comment & Rating (3)
All
Print Profile
0.2mm nozzle, 0.14mm layer, 4 walls, 100% infill
this turned out okay. the quality struggled a bit with the .4 nozzle. I think the size needs increased or settings in the prifile need to be tweeked
The designer has replied
0
Reply
Thank you for your feedback... but please take into account that this is a .2 nozzle profile. It was not designed to be a .4 profile. If you have quality issues with a .2 nozzle you are welcome to get back to me.
0
Reply
Print Profile
0.2mm nozzle, 0.14mm layer, 4 walls, 100% infill
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld