Show your support for the brave defenders of Israel with this 3D printed filament painting of two women of the Israeli Defense Forces guarding their homeland's southern border at sunrise. Features the biblical text "הנה לא־ינום ולא יישן שומר ישראל" - "See, the guardian of Israel neither slumbers nor sleeps!" (Psalms 121:4).

Printing Instructions:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Use Arachne wall generation.

Filaments Used:

PLA BambuLab Basic Black Transmission Distance: 0.6

PLA PolyLite Pro Army Green Transmission Distance: 0.5

PLA BambuLab Matte Ice Blue Transmission Distance: 3.5

PLA BambuLab Basic Magenta Transmission Distance: 8

PLA BambuLab Basic Beige Transmission Distance: 8

PLA BambuLab Matte Lemon Yellow Transmission Distance: 4

PLA BambuLab Basic Jade White Transmission Distance: 4

Swap Instructions:

Start with Black

At layer #5 (0.48mm) swap to Army Green

At layer #11 (0.96mm) swap to Ice Blue

At layer #14 (1.2mm) swap to Magenta

At layer #15 (1.28mm) swap to Beige

At layer #16 (1.36mm) swap to Lemon Yellow

At layer #17 (1.44mm) swap to Jade White for the rest.

Please note: I am publishing this model under a non-commercial license. However, you MAY use this model for commercial purposes IF AND ONLY IF you donate at least 50% of your proceeds to a verified charity that is supporting Israel’s self-defense efforts - including efforts to support the IDF, Israel’s hospitals and medical personnel, or Israel’s humanitarian needs. Thank you.