I'm sorry to hear it didn't work for you, but I believe you may have a slightly smaller box than mine and that should be the issue. Could you please tell me the internal dimensions of your box so I can try and make a v2 that would fit your box and potentially other people boxes. My box has an internal width of 29.5 mm so the current dimensions work just fine for me (as you can see in the photos I uploaded)

Also, what do you mean with the player boxes fall into the box bellow? The player boxes go in the first "layer" of the insert which means they are not stacked on top of any box. You have to put first the four player boxes and then the leader cards box on top of those

I edited the second part, it was inserted incorrectly on my side, sorry for that. My box is also 29.5 mm on the inside, however I can't tuck in the box on the side of the leader, there's just not enough space, it would need like 5mm more to fit in. It just bends the side of the box out and I'm afraid it would tear

That's great! Glad to help

Same, now my insert is functional. Thx

Thanks!

Hi! I believe I can make a new upload just for those player boxes, just tell me how high you want them? Are you planning to not use the leaders box and have the player boxes with the full height of the two layers of boxes?

Hello! Initially yes. I want to remove the leader box. Then if you could raise the player boxes almost the whole way, just leaving a bit of space to lay the leader cards on top of the boxes without a tray, split in two stacks? Can't tell from pictures if the area is big enough to lay the leader cards side by side. if that doesn't seem to be a big change then removing the leader boxes and just raising the player boxes the whole way would be the other idea. I'll just spread the leader cards above the game board in this scenario and deal with a bit of lid lift? for reference, I currently store the soldier miniatures, 3 agent miniatures, 1 faction miniature and etsy upgrades for each faction piece in the boxes linked below. Everything just fits but the boxes are bulky with the snapping lids. I do not store the starting deck in my current box, which is one thing I love about your design. So if the space created in your player box is bigger than that, everything will fit fine. https://www.amazon.com/LOCK-TOP-186616-SNACK-CONTAINER/dp/B07DZ2ZS8Y/ref=asc_df_B07DZ2ZS8Y/?hvadid=532544000785&hvpos=&hvnetw=g&hvrand=9938399032298686907&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9032151&hvtargid=pla-1415638188418&psc=1&mcid=6aa71cb807563a3fb9364250ed61f1d3 I don't use 6 player/solo player parts, so I can shift the worms and such to one of those bins as needed. Either way I appreciate your time. My friend just got the bambu printer and I'm starting to learn how to edit, but it will be a while before I can do all of this :) thanks again reuben

I should have said remove the leader tray and the sandworm tray. raise the player boxes up pretty much the whole way and I will move the worms etc to another spot. thanks!

Hi, could you please describe exactly the issue? Are you saying that in the top layer the boxes don't fit next to each other? (By how much?) The leader box has a width of 152 mm (I cannot make it less than that otherwise the leader cards don't fit in the box) and each player box is 74 mm wide, making each pair 148 mm wide. I know that makes the player boxes 4 mm smaller than the top leader box but since some people needed them to be smaller to fit on the bottom half, I needed to do it that way. Regarding the top layer, the leader box + 6th player box + tiles box are 295 mm wide which is exactly the internal size of the box so there shouldn't be any problem

Sorry to hear it didn't work for you, what's the internal dimensions of the box of your copy? Mine is 29.5x29.5 mm, but I can try to make a v2 adjusted to a different box size

I remade the player boxes so they are smaller and know you just need to replace the four original player boxes with the v2 of them (print profile or raw model files) :)