Case Mounted Wire Holder by Silver Harmony Studios

Silver Harmony Studios

Tools>Organizers

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

0.6mm nozzle, 0.24mm layer, 2 walls, 10% infill

Designer

36 min

1 plate

Boost

Released

Description

I was getting tired of bendeing down to pick wires up off the ground when I wanted to connect my drawing tablet to my computer or my Valve Index connection end, so I made this for the side of my computer wire. The idea is to use a bolt on your case to hold it on if you have external bolts on your computer case.

This is for 2 wires in particular, 1 works especially with the valve index wire.

Suggested Infill: 10% is what I printed mine at and it works

Mounting Hole: 2.92mm Diameter (Can be resized with a drill bit to fit needs in post process)

Left Holder: 9.7mm Diameter wire max

Right Holder: 6mm Diameter wire max

Comment & Rating (2)

@sabatacon

Completely unrelated to the model, just wanted to warn you that the index headset connector is not meant to be disconnected frequently at that point. That connector is only rated for 50 or so disconnects, and should be treated very carefully.

The designer has replied

@silverharmonyst

Where does it say that so I can read the warranties and such, as I cannot find this issue of which you speak? I have had my headset for 3 years now and have had no such issue thus far with it connecting or disconnecting from said secondary cable.

No more