Print "cat_box.stl".

Meanwhile, measure the inside of a shelf compartment, remove about 10mm on each measure: width, depth and height.

With wire (e.g. recycled wire hangers), cut 4 x height, 2 x width and 2 x depth.

Using cardboard (or any other similar material cats like to sleep on), make a bottom plate (width x depth).

Once the print is done, you should have 8 corners: 4 bottom clips and 4 top connectors.

Push the wire in the clips and the connectors as depicted in the other stl (not to be printed, it is just a model of how everything fits together).

Cover with an old t-shirt. Secure with safety pins or paper clips.
Let him enjoy...

(No cat was harmed in the making of this box. Fingers, however, were. Cats are extremely territorial...)

Wanhao i3 Duplicator

No

50%