this is my first draft on a Mac Studio Raspberry pi case, it is a 1:1 (or as close as i could get with pixel measurements).

>> this is just a draft model, im planing on changing a lot about it in the futur to make it better <<

this case should fit more or less every raspberry pi model b that has mounting holes spaced 58x49, and there is a large opening in the back, for you can have a usb adapter hanging out, so you still can connect your peripherals.

the case is held together with m3 screws, the same with the raspberry pi mount, and 2 m3 nuts for the outer case to be clamped onto the base.

there are 2 difrent types, one with the same sized holes (well, as close as i could get to the real deal XD) and another that is more print friendly, but i doubt that there wont be any cleaning up afterwards with that many holes.

the hole diameters on the realistic one is 1,6mm with 0,4mm in between, and on the print friendly it is 3mm with 2mm in between.

there is a 9,5mm hole in the front (for now) to fit an led, i know it needs to be smaller (D=0.95-1.0) but i forgot to change it, after i uploaded the model here on prureprinters, so thats definitely one thing that going to be changed.

• added 2 test prints, so you can test print and see, if the exhaust holes can be printed on your printer.

(i do not claim to own or anything similar, aboutany designs, names or any of Apples inc. intellectual properties , all copyrights belongs to Apple inc. )