LED Matrix Frame Clips
Copyright Claim
LED Matrix Frame Clips
Boost
5
7
7
Print Profile(1)
LED Matrix Frame Clips (0.28mm layer, 4 walls, 15% infill)
Designer
12 min
1 plate
Boost
5
7
7
0
41
55
Released
Description
Optional clips for the LED Matrix Frame if the front is a bit loose and you rather not use glue.
Works with:
- 8x32 LED Matrix Frame https://makerworld.com/models/127255
- 16x32 LED Matrix Frame https://makerworld.com/models/135943
- 32x32 LED Matrix Frame https://makerworld.com/models/178256
Print the clips on their side and use at least 4 wall loops.
My other LED projects:
Comment & Rating (7)
All
Print Profile
LED Matrix Frame Clips (0.28mm layer, 4 walls, 15% infill)
could be more snappy because they tend to fall off rly easy
The designer has replied
0
Reply
There's no clearance between the frame and the clip, so I cannot really make it any tighter... but you can try to play with the "X-Y countour compensation" setting (in BambuStudio/OrcaSlicer, under Quality/Precision) and thicken the clips a bit
0
Reply
Print Profile
LED Matrix Frame Clips (0.28mm layer, 4 walls, 15% infill)
pas de souci
0
Reply
Print Profile
LED Matrix Frame Clips (0.28mm layer, 4 walls, 15% infill)
No issues with print. Clip on tightly, thank you.
0
Reply
Print Profile
LED Matrix Frame Clips (0.28mm layer, 4 walls, 15% infill)
0
Reply
Print Profile
LED Matrix Frame Clips (0.28mm layer, 4 walls, 15% infill)
0
Reply
Print Profile
LED Matrix Frame Clips (0.28mm layer, 4 walls, 15% infill)
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld