Bambu Labs 6 Piece Tool Set

Thank you so much for your Downloads, ❤ Like and BOOSTS!

Included Tools:

• AMS Power Cable Disconnect - Pushes the hidden clip that is facing printer on the AMS Buffer & Hub.
• AMS HUB PTFE Disconnect - Remove PTFE tube from the Bambu Lab AMS Hub (Smaller than Buffer)
• AMS BUFFER PTFE Disconnect - Remove PTFE tube from the Bambu Lab AMS Buffer (Larger than Hub)
• Buffer Outlet Fork - Fits between spring (through the slot, no need to remove buffer/hub) and slide/push on the PTFE coupler in the AMS Buffer/Hub. Also works great for PTFE removal on hotend and AMS.
• Hotend Wire Disconnects - If you need a helping hand removing the Bambu Hotend/Nozzle Connectors.
• OPTIONAL STRAIGHT AMS BUFFER & HUB PTFE Disconnect - Rotated the end of disconnect tool

If you want to up your cool game, use 6x3mm Magnets. Pay close attention to the magnets polarity (all bottoms face same direction/polarity, while all the tops of tool, magnets are the opposite polarity - other words, Magnets will all face the same direction in polarity). They're designed to fit magnets snugly, but you might need a little glue for some of them.

NEW TOOL SET HOLDER: https://makerworld.com/en/models/105024#profileId-112080

Example usage:

Checkout some of my other models…

https://makerworld.com/en/models/105024#profileId-112080

https://makerworld.com/en/models/93011#profileId-99425

https://makerworld.com/en/models/81622#profileId-86911

https://makerworld.com/en/models/71757#profileId-75921

https://makerworld.com/en/models/152636#profileId-166673

This original disconnection tool inspired an entire line: https://www.printables.com/model/382058-bambu-ams-disconnect-tool