Remember keep the door open at the very least if on P1S or X1 and this will print perfectly every time in one single plate. 


itmm85

Medium Size, Single + screw, 0.2mm layer, 6 walls, 25% infill

Sehr gutes Design und es funktioniert! Die mittlere Größe ist für mich die beste und am stärksten. Ich habe ein eigenes Druckprofil veröffentlicht.

- Gedruckt in 0,28 mm Extra Draft, mit 100 % Füllung, 10 Wandlinien und 1 Stunde Druckzeit
- Bambu PLA Tough Orange (12300) in weniger Speed und ohne Support


Panda279TV

Medium Size, Single & Dual, Strong Print Settings

Printed well and looks nice. Used 50% gyroid infill, PETG. I wonder how much weight it will hold (it seems to be tearable by hands).

jsfn91

I found the same issue with PETG unless I went with 100% infill.  I switched to PLA Professional at 50% and it was strong enough for my 100 pound daughter to swing from over a pile of pillows!

TechCowboy

Looks like it should! And in only 30min?! Very Cool!!

baerbro

KoNx2k

Small Size, Single & Dual, Strong Print Settings

msa1906

ajrcustoms

Large Size, Single & Dual, Strong Print Settings

Geniales!!!!
¿Crees que se podrian escalar sin problemas en el slicer para tenerlos de mayor tamaño?

Nerro3D

hat super geklappt , die s hakemmkommen mit auf den nächsten kampung trip 

ahnungslos

backtheweb

squinn

2023-09-22_m6uslh6wqnnr.jpg

2023-09-22_g1vek9bmenty.jpg

2023-09-22_1fhwdn73ezbl.jpg

2023-09-22_w6suz3xwflsc.jpg

2023-09-22_pbsaa5jg4cla.jpg

2023-09-22_vrzsfudae0fg.jpg

2023-09-22_mzmezr5m2i11.jpg

2023-09-22_n3yo7i2w6drb.jpg

20230922_094444.webp

plate_1.webp

plate_2.webp

plate_3.webp

plate_1.png

plate_2.png

plate_3.png

The medium size of the both the single and dual carabiners, with the parts on separate print plates, using strong print settings in the slicer, at a .2 mm layer height.

20230922_094433.webp

The small size of the both the single and dual carabiners, with the parts on separate print plates, using strong print settings in the slicer, at a .2 mm layer height.

20230922_094108.webp

The large size of the both the single and dual carabiners, with the parts on separate print plates, using strong print settings in the slicer, at a .2 mm layer height.

jub-jub

Carbin_7c9637b5-0ecd-42d8-83c9-71ec20876dc9.webp

Settlers

0.2mm layer, 6 walls, 25% infill

400204548_637454825259999_3513227674773241793_n.webp

KenPrint3D

Dual color printed by object 1 after the other, you can watch the slicer preview to see how I did it.

Small Dual Color

400179767_1951300248587223_1077085931849091562_n.webp

1 dual piece printed 2 colors.Parts are printed by object 1 after the other so it is very fast, rather then changing filament at every layer :) Thanks a lot

PLA/1Dual Carabiner/2colors

tempImagetuiecU_8372143a-b1f5-44fb-8962-3042c64681e2.webp

winni118100

Medium Size, A1 mini, 0.2mm layer, 6 walls, 25% infill

tempImageMXXRse_ba8c508b-de88-4282-8540-e35199e4310a.webp

Small, A1 mini, 0.2mm layer, 6 walls, 25% infill

FitzPrints

one of my printers has a 0.6mm nozzle in permanently so its always good to have the option on makerworld.

0.6mm nozzle, 0.3mm layer, 3 walls, 15% infill

IMG_1917_bea831fa-b89b-43fb-9835-89b05ce7eb6e.webp

IMG_1918_ed5f8f4c-be79-41bc-a7e9-5e6cd582664a.webp

1x_dual_lock_multi_color

1x_single_lock_multi_color

DasLukas

Print both the carabiner and the knob on a single build plate, using the 'Print Sequence: By object' setting.

Medium, Print By Object, 0.2mm layer, 6 walls, 25% infill,

IMG_1925_cc58c02c-35f7-4edd-8b1f-b9c34d1c7260.webp

IMG_1927_49058185-d568-4f0c-b1e8-cdfe20706738.webp

IMG_1923_cdefc93c-a565-42e4-b061-d4a377621ea0.webp

After experiencing some problems with bed adhesion for the knob, I modified the settings for extra stability. To remove the tree supports inside the thread, insert a flat screwdriver from the top and rotate it, as if unscrewing the support from the thread. See my images for clarification.&nbsp;Print both the carabiner and the knob on a single build plate, using the 'Print Sequence: One Object at a Time' setting.

Medium, Print By Object, Stabilized, 0.2mm layer, 6 walls, 25% infill

IMG_1064_85aba15a-0e61-4e0f-aa46-6d57373f5eeb.webp

Simply a stronger version that works without any problems! I recommend drying the filament first, then printing the design and leaving it to cool for at least 3 minutes. The test was printed with PLA Tough Orange from Bambu Lab.&nbsp;Einfach eine stärkere Variante, die problemlos funktioniert! Ich empfehle das Filament zuerst zu trocknen, dann das Design zu drucken und es mindestens 3 Minuten auskühlen lassen. Gedruckt wurde der Test mit PLA Tough Orange von Bambu Lab.

[Medium Size][Very Strong] - 0.28mm layer - 10 walls - 100% infill

Large Size, A1 mini, 0.2mm layer, 6 walls, 25% infill

A standard and dual screwgate locking carabiner, using a print-in-place pivot mechanism, and available in multiple sizes.&nbsp;The STLs for three different sizes of each style are included here for convenient printing. This model is fully parametric though, and so the Fusion360 files are included for those that would like to generate different sizes or refine the model further.

Print Profile(14)

Description

Comment & Rating (211)

License

Remixes (1)

Small - Standard Carabiner - Lock Thread

Related Models

Klick lock container - Diamond pattern

Carabiner

Screw-Lock Carabiner in different shapes

Klick lock container - spiral pattern

Single & Dual Locking Carabiner (Parametric)