Worx 20V 1.5Ah Battery Wall Mount (Holder)
Copyright Claim
Worx 20V 1.5Ah Battery Wall Mount (Holder)
Boost
17
20
9
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
41 min
1 plate
Boost
17
20
9
0
64
48
Released
Description
Appreciate the design? Consider supporting my work by following my account :)
Worx battery holder is designed to hold a Worx 20V 1.5Ah Power Share battery (tested on an EU-bought battery). The holder is designed to be mounted to a wall or below your workstation, using M4 screws.
I have also included an alternate version of the holder in which the battery does not lock in place, but the design is still secure enough to keep the battery safely in place. This option provides the added benefit of not requiring you to press the release button to remove the battery from the holder.
Additional material needed:
2* M4 screws
Print instructions:
Tested on 0.20 and 0.28, which both worked great. I recommend PETG, since its more durable than PLA
Comment & Rating (9)
All
Print Profile
0.2mm layer, 2 walls, 15% infill
Perfect! Without Support👍
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Clicks right in!
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
printed 4 at once. profile worked perfectly. Just make sure your selected filament bridges well.
(Edited)
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
perfekt
2
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
This is not for America version tool . do not work on my battery
(Edited)1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
2
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld