a little print of a macaw
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PETG JAYO Black Transmission Distance: 1.6
PLA PolyTerra Sapphire Blue Transmission Distance: 5.2
PLA PolyTerra Savannah Yellow Transmission Distance: 3.5
PETG JAYO White Transmission Distance: 7.1
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Sapphire Blue
At layer #12 (1.04mm) swap to Savannah Yellow
At layer #18 (1.52mm) swap to White for the rest.