Stormtrooper Splatter Art (Fanart) - A HueForge and Leonardo AI Crafted Model
Boost
42
86
3
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
6.6 h
1 plate
Boost
42
86
3
0
92
23
Released
Description
Printing Instructions:
- Print at 100% infill.
- Layer height: 0.08mm, with a base layer of 0.16mm.
Filaments Used:
- PLA BambuLab Matte Charcoal, Transmission Distance: 0.6.
- PLA BambuLab Basic Orange, Transmission Distance: 10.
- PLA BambuLab Tough Light Blue, Transmission Distance: 3.
- PLA BambuLab Matte Ivory White, Transmission Distance: 4.
Swap Instructions:
- Begin with Charcoal. Swap to Orange at layer #3 (0.32mm).
- Change to Light Blue at layer #11 (0.96mm).
- Finish with Ivory White starting from layer #18 (1.52mm).
Comment & Rating (3)
All
Print Profile
0.08mm layer, 2 walls, 100% infill
Turned out sweet. Easy print and looks amazing with a silk white.
(Edited)
1
Reply
Print Profile
0.08mm layer, 2 walls, 100% infill
0
Reply
Print Profile
0.08mm layer, 2 walls, 100% infill
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld